When it comes to hand-pieced patchwork, I love the double-sided results I get from this bojagi-inspired flat-felled seam. You can see more of my bojagi work in this post from a few months ago.
This kind of patchwork is perfect for household linens like napkins, tablecloths, and curtains. I also love the idea of a wrapping cloth, which is a nice nod to the traditional Korean patchwork that inspired this style of stitching.
To start, I prewashed some linen. Because this seam is double sided, I recommend using solid linen or cotton fabrics. There are also some beautiful weaves or ikats that would bring in the element of pattern nicely because the pattern would be on both sides.
I've got chenille needles sized 24, but I've sewn these stitches with a variety of needles. I found my favorite needles in some old mystery packs - they're probably just plain sharps. Essentially, if your thread goes through the eye, it'll do just fine. I also like shorter needles better than longer ones.
For thread, I usually measure out twice the length of the seam that I'm about to sew. Any thread will do, but my favorite is Aurifil 12 weight. It's just thick enough to be visible, but no so think that there's a lot of resistance as you pull the needle through the fabric.
Iron a fold in both of your fabrics. One fabric should have a fold that is 1/4". The other fabric should have a fold that is between 1/2" and 5/8". (Later steps are a bit easier if you have aa 5/8" fold).
Using pins or Clover Clips, align the folds together so that the short sides are facing away from each other.
Place the short, 1/4", fold facing you, and the long, 5/8" fold away from you.
Push the needle up through the long fold.
The knot will be hidden in a later step.
Continue with a whipstich all along the fold. As you pull the thread for each stitch, pull just hard enough to get the thread to rest against the fabric (without making a loop in the air.) Don't pull the thread so tightly that the fabric is cinched in the stitch.
At the end of the row, place a second stitch over the previous stitch, leave a loop, and bring the needle through the loop to make a small knot. Repeat the knot.
Clip your thread. I clipped this a bit too short - I recommend that you leave a small tail which will help keep your knot secure over time. If you clip the tail too short, it can work its way back through the knot and unravel.
This knot will be hidden in the seam allowance of the next seam.
Don't adjust the short fold. Unfold the long fold just like you're opening the cover of a spiral bound notebook.
Fold it back onto itself and finger press the fabric inside the stitches.
Fold the long fold over the edge of the short fold. It's helpful if you can use an iron for this step, but it isn't necessary. I'm often stitching when I travel, and I finger press and use clips to get this fold without an iron.
Next, fold the new fold (long blue fold around the short brown fold) onto the short fold fabric (brown).
Pinch the fabric to make a fold in the brown fabric.
Place clips or pins to secure this brown fold to the blue fold that you either ironed or finger pressed.
Start the stitch underneath the raw edge. The knot will be contained in the finished seam.
Continue with the whipstitch along the two folds just as you did in the earlier step.
At the end make another knot. The knot will be visible until it's contained in the next seam allowance. Open the brown fabric, again like a spiral bound notebook.
The double-sided seam is complete, and all the raw edges are contained.
12-05-22
blairebble@gmail.com
https://sportstoto7.com/
I heard what you need to say! You raise a great point and I’ve pondered exactly the same thing. I think remarks are certainly heard in any event, when it is a bustling discussion. Regardless of whether the creator have the transfer speed to answer each and every remark, other analysts that are bought in can bounce into the discussion like you and I are doing now.
One thing I’ve generally pondered is… the reason don’t more analysts get into conversations with other analysts? There are such countless valid statements to develop in an enthusiastic discussion.
I concur. I’d very much want to see more association between analysts to keep the discussion rising along.
pls visit my site https://sportstoto7.com/